Eliminate a Leaking Tank With Superior Water Heater Installation in Jacksonville FL

by | Jan 8, 2016 | plumbing

The typical water heating system uses a large tank for storage and either electrical resistance or natural gas to heat the water. Unfortunately, there are some concerns with this method including the chance of leaks, corrosion or failure to heat properly. Some failures may be easy to fix such as replacing a damaged electrical element, but corrosion on the tank usually means it’s time for Water heater installation in Jacksonville FL. The main reason for this is that corrosion can occur at the base of the tank or around any connections, and this damage is not repairable.

To reduce the chance of corrosion related problems, some appliance manufacturers are placing liners inside the tank. The two most common options are glass and cement. Glass tends to be the least durable, and there is some chance that the glass may not cover the seams around connections properly. Another concern when using glass is the chance of breakage if the appliance is dropped or falls. The alternative for those people who want the best is a cement liner. Cement works better because it is a dense material that can be very water resistant. Plus, cement provides an excellent, even coating inside the tank that properly seals around any connections.

Water heater installation in Jacksonville FL appears to be an easy task. After all, it only requires the removal of a couple of pipes, the power connection for electric models or the fuel supply for gas burning systems. Sadly, things are never this easy. For one thing, it is necessary to shut off the water supply and any electrical or fuel supply the appliance requires. It is also necessary to drain the tank. The latter process may take some time because of back-pressure. The easiest way to handle this task is to connect an untangled hose to the valve on the tank. Once the hose is in place and properly stretched out to eliminate kinks, open the hot water valve inside the home and farthest away from the water heater. This removes any back pressure and lets gravity pull the water out of the tank. Click this link to read the full info here.


Latest Post



Similar Posts